Experimental Nano-Ultrafine Grinding Machine
Product Introduction
实验纳米超细研磨机 简介此款为0.3L砂磨机系统，研磨筒体为0.3L，每批次可以做0.5—1L的浆料，研磨介质在0.6-2mm,研磨细度可达10um-50nm，适用于企业、高等院校、研究院的前期实验和研发阶段。小巧精致，操作简单，物料可以在很短的时间内就能够达到超细研磨和分散的效果，研磨效果可以放大到生产，分散研磨高精密和细度要求较高的产品。很多客户跟我们反馈之前购买的砂磨机会出现漏料、堵料、细度达不到，这和砂磨机设计的结构，机封的选型，物料匹配性有关。斯路森团队会根据物料和客户需求为您
Types & options
| Model | SSG-LN0.3 |
| Cylinder volume L | 0.3 |
| Processing batch size L | 0.5-1 |
| Speed r/min | 0-3000 |
| Grinding efficiency kg/h | 2-5 |
| Drive power kw | 0.75 |
| Dispersion mixing | Including a set of 60W mixer |
| Feeding device | Contains a peristaltic pump |
| Host size | 700mmx600mmx450mm |
Introduction
This model is a 0.3L sand mill system, and the grinding cylinder is 0.3 L, each batch can produce 0.5-1L slurry, the grinding medium is 0.6-2mm, and the grinding fineness can reach 10um-50nm. It is suitable for the preliminary experiments and research and development stages of enterprises, universities, and research institutes. . Small and exquisite, easy to operate, materials can achieve ultra-fine grinding and dispersion effects in a short period of time. The grinding effect can be amplified to produce products with high precision and fineness requirements.
Many customers have reported to us that the sanding machines they purchased previously had leakage, blockage, and insufficient fineness. It is related to the structure of the sand mill design, the selection of the mechanical seal, and the matching of materials. The Slusen team will customize the equipment for you based on materials and customer needs to ensure the best match
Performance
- Small and exquisite, place directly on the desktop, 220V voltage
- Easy to operate and clean
- A complete small system, more convenient to use, including main machine, mixing device and feeding device
- Uniform particle size distribution, warmExcellent control and low energy consumption.
- Adopts large-flow static centrifugal separation screen with large discharge area,The grinding media has no contact with the screen, does not wear and has a long service life.
- The discharge port is designed in the middle and lower part of the discharge flange, Avoid screen clogging caused by material precipitation
- The grinding cylinder and grinding rotor adopt a forced cooling system, with low discharge temperature and no impact on sensitive materials.
- Replaceable grinding chamber and rotor, using high qualityCeramic zirconia reduces the contamination of materials during the grinding process of the equipment and ensures the high quality of the machine
- Double-end modular mechanical seal, all-round guaranteeNo leakage
- Mobile protection device to improve safety Performance
Schematic diagram
A good brand of sand grinder can solve the following problems. Helping you find the right solution will get twice the result with half the effort! !
1 solution20μm-50nmFineness problem
2 solution without discoloration Purity problem without metal contamination
3 Solving the problem of low energy consumption and high output in year-on-year grinding
4 Solve the problem of sealing liquid blocking the separator and shutting down
5 Solve the problem of frequent replacement Problems with the stability and longevity of core accessories
6 Solve timely and professional service issues
Contact us
According to materials and actual working conditions, we Provide customized solutions.
The company has prototypes for you to experiment with. You are welcome to send materials or visit the factory for guidance.
Tel: Manager Zhang 13861770816 (same number as WeChat)
We provide customized solutions based on materials and actual working conditions.
The company has prototypes for you to experiment with. Welcome to send materials or visit our factory for guidance.
Related Products
CONTACT US
-
-
+ 86 13861770816 Sales Hotline
-
