home > product > Inline high shear homogenizer

Pesticide emulsifier

Product Introduction

Pesticide characteristics of pesticide emulsifier 1. Pesticide SC suspension agent, 2. Multiple varieties, small batches, 3. Materials are sensitive to temperature, the dispersion and grinding temperature is controlled within 35°C 4. High requirements, cross-contamination needs to be avoided 5. Fine discharge Quality is guaranteed only if the temperature is within 5um. Special materials such as seed coating agents are required to be within 2um. 6. Additives such as surfactants in pesticides are prone to bubbles. The equipment and process should minimize the generation of bubbles. Pesticide process requirements: 1. Premix evenly. No precipitation, no floating, no agglomeration 2. Temperature control, cooling during the dispersion and grinding process 3. Minimum foaming rate during the dispersion and grinding process 4. Good dispersion, high stability, stable product quality 5. No pollution, reduce harmful effects Emissions of ingredients6. Control the final discharge fineness D90≤5um process flow chart

Tel:+86 13861770816 Email:zhangmin@machine12.com Request a quote

Types & options

Type No.	Motor power(KW)	Turn Speed（rpm)	chu 理 Quantity(L/h)
SFB-3/SCX-3	3	2900/9000	0-3000
SFB-5/SCX-7	5	2900/8000	0-5000
SFB-11/SCX-11	11	2900/6000	0-10000
SFB-15/SCX-15	15	2900/6000	0-20000
SFB-30/SCX-30	30	2900/4500	0-35000
SFB-45/SCX-45	45	2900/4200	0-40000
SFB-55/SCX-55	55	1450/3600	0-60000
SFB-75/SCX-75	75	1450/3600	0-75000
SFB-90/SCX-90	90	1450/ 3000	0-90000
SFB-110/SCX-110	110	1450/3000	0-110000
SFB-132/SCX-132	132	1450/3000	0-140000
SFB-200/SCX-200	200	1450/3000	0-200000
Voltage/frequency	380V/50HZ

Pesticide properties

1. Pesticide SC suspension agent,

2. Multiple varieties, small batches ,

3. The material is sensitive to temperature and disperses The grinding temperature is controlled within 35℃

4. The requirements are high and cross-contamination needs to be avoided

5. The quality is guaranteed only when the discharge fineness is within 5um, and special materials such as seed coatings are required to be within 2um

6. Additives such as surfactants in pesticides are prone to bubbles, so the equipment process should be reduced as much as possible Generation of bubbles

Pesticide process requirements

1. Premix evenly, no precipitation, no floating and no agglomeration

2. Temperature Control and cool during the dispersion and grinding process

3. Try to keep the temperature as low as possible during the dispersion and grinding process Foaming rate

4. Good dispersion, high stability, product quality Stable

5. No pollution, reduce the emission of harmful components

6. Control the final discharge fineness D90≤5um

Process flow chart

Introduction to pesticide emulsifier

Pesticide suspension emulsifier, pesticide water emulsion emulsifier, pesticide emulsifiable concentrate emulsifier, biopesticide The working chamber of the emulsifier, cypermethrin water emulsion emulsifier, and glyphosate mixing emulsifier is equipped with a set of high-precision multi-tooth stator and rotor. After the material is sheared, dispersed, emulsified, and homogenized at high speed by the stator and rotor, the material reaches the ideal treatment. Effect.

The following is a list of homogeneous emulsification equipment made by Lussen, which type to choose, please contactMr. Zhang 13861770816, good at providing solutions based on material matching

It can be online continuous mode or loop mode. The structure is different according to different requirements

Stand-alone emulsification pump.png

Single-stage emulsification pump with machine seal.png

The above are several The typical representative of the single-pole emulsification pump is the difference in type. On this basis, the structural selection of the knife unit is also very important. Different structures directly affect the effect, and the matching of the structure and material working conditions is the most important. Mr. Zhang 13861770816

Performance advantages

Main image customization 1.jpg

•Special mechanical seal to ensure no leakage in all aspects

•High-precision stator and rotor, tooth slot number, distribution geometry, matching materials

•Match the stator and rotor according to the material and provide customized services

•Significantly reduces blending time

•Clumping-free mix

•No dry premixing required

•Large processing capacity, mass production

•Ability to quickly start or stop processes to process raw materials on demand

•The products are uniform and the materials are fine,

•Small structure, low noise

•The product space has no dead corners and is easy to clean

•Easy to operate and use, and easy to maintain

Selection reference

Slusen has accumulated a large amount of test data and has prototypes for you to experiment with. Welcome to send materials and come to the factory for guidance and inspection. Mr. Zhang: 13861770816

Dependent on batch size, recipe, and ingredient type Which machine in the SLUSON series is suitable for you? The following is only for reference selection and customized services are provided.

Customized machinetype

Slusen stator and rotor are proprietary stators and rotors. The tooth slot arrangement, distribution and quantity are all customized according to the characteristics of the customer’s materials and actual working conditions. , ensuring the best matching, high temperature and corrosion resistant materials, CNC finishing.

WeChat picture_20230314101820_copy.jpg